Search This Blog

Translate

Wednesday, February 11, 2015

How to fix no power on power supply Hipro ?

power supply model 
power supply top view
power board 




top of the power board
spoil capacitor on the board 
power board

spoil capacitor
spoil capacitor 
power board without spoil capacitor


power board by new capacitor


I have PC power supply that cannot turn on the computer. I know that all power Supply of two distinct parts, namely primary and secondary parts formed. To ensure that the main section is healthy, I Check purple cable with a voltmeter. If the voltage on the voltmeter shows +3.3V or +5V, I am sure that the primary part is healthy. Now open frame power supply and I will check the secondary section with  Ohmmeter. If the test capacitors on both sides of the ohmmeter needle move, capacitor or diode should be replaced. Open Capacitor from circuit with, and Ohmmeter check again and I determined that the diode is healthy or not. The Power supply the eye becomes apparent that some of the capacitors broken. I exchange them with new capacitors and power Supply is ready.



1 comment:

  1. If the voltage on the voltmeter shows +3.3V or +5V, I am sure that the primary part is healthy. Now open frame power supply. military power supplies

    ReplyDelete

Subscribe in Reader