Search This Blog

Translate

Wednesday, May 20, 2015

Canon BJC-50/55 Error Codes


Canon BJC-50

Canon BJC-55


How to repair Canon BJC-50/55 Error Codes 

Most objections emerged in inkjet printers, the codes are displayed to inform the user and the repairman arrives.
Basic troubleshooting in these printers, done by reading codes.
Repairs carried out by the solutions proposed in the table.



LED Power
LED Error
Beeps Times

Error
Solution
On
On
1
Paper finished
Add Paper in the cassette
On
On
2
Paper Jam
Clear Inside paper jam
On
On
3
Cartridge
Reinstall Cartridges
On
On
4
Install Cart.
Reinstall Cartridges
On
On
6
Low Battery
Recharge The Battery
On
On
Alternate
No Battery
Recharge The Battery
On
On
1
Feed Error
Check Paper
On
On
2
Low Ink
Replace Cartridge
Blinking
On
3
Position Cart.
Reinstall Cartridges
Blinking
On
4
Low Battery
Recharge The Battery
Blinking
On
5
Absorber Full
Replacement absorber kit and reset counter
Blinking
On
6
Failed Battery
Replace The Battery
Blinking
Blinking
1-12
Services
Service Require



Tuesday, May 19, 2015

Canon BJC-70 Error Codes




Canon BJC-70


How to Repair Error Codes Canon BJC-70


Most objections emerged in inkjet printers, the codes are displayed to inform the user and the repairman arrives.
Basic troubleshooting in these printers, done by reading codes.
Repairs carried out by the solutions proposed in the table.



Error
Problem
Solution
C1
Absorber Full
Reset the Counter
C5
Low Battery
Recharge The Battery
E1
Paper finished
Add Paper in the cassette
E2
Paper Jam
Clear Inside paper jam
E6
Print Head
Install Print Head Properly
FC
Low Battery
Recharge The Battery
F12
Temperature
Stop print for while
F13
Print Head
Install Print Head Properly
F14
Absorber Full
Reset the Counter
Blinking
Print Head
Service Require




Hp Laserjet P3015 Printer 50.9 Fuser Error

Hp Laserjet P3015 Rear
Hp Laserjet P3015 Rear
Hp Laserjet P3015 Rear
Hp Laserjet P3015 Fuser
Hp Laserjet P3015 Fuser
Hp Laserjet P3015 Fuser
Hp Laserjet P3015
Hp Laserjet P3015

50.9 Fuser Error Because to High Temperature 

The 50.9 Fuser error is a high-temperature error in the Fuser. The first step to take is to turn off the machine for 15 minutes to cool down fuser. if the error appears again check Fuser settings on the menu and make sure that is set to normal, Other things that cause  this error weak ventilation or an extremely warm environment. Place the printer where the air flows around it. After a long and continuous prints can printer showing error  50.9. let a while cool down.

Service manual Printer HP Laserjet P3015 about the error say:

  • Power cycle the product to determine if the error is persistent.
  • Verify that the correct model is installed.
  • Verify that the correct voltage connects to Fuser.
  • Check connectors J8002, J1505, J18 are properly connected to ECU.
  • Check connectors J1608, J18 are properly connected to ECU.


Fuser Replacement (RM 1-6274-000CN)

  • Open the rear door.
  • Pull down lower the door and door.
  • Push up on the link arm to release it.
  • Remove two screws.
  • Open the Lower-rear door.
  • Release one tab.
  • Pull down on the rear-door to remove it. 
  • slide the right cover toward the inside to release it. 
  • Disconnect three connectors and one wire.
  • Remove four screws.
  • Pull out the Fuser.


Monday, May 18, 2015

Canon BJC-80/85 Error Codes


BJC-80

BJC-85

How to fix Error Codes Canon BJC-80 OR BJC-85


Most objections emerged in inkjet printers, the codes are displayed to inform the user and the repairman arrives.
Basic troubleshooting in these printers, done by reading codes.
Repairs carried out by the solutions proposed in the table.


LED Power

LED
 Error
Beeps Times
Error
Solution
Off
Off
0
Printer Off

On
Off
0
Printer Ready

On
On
1
Paper finished
Add Paper in the cassette
On
Blinking
2
Low Ink
Change Cartridge
On
On
2
Paper Jam
Clear Inside paper jam
On
On
3
Print Head
Install Print Head Properly
On
Blinking
4
Cartridge
Reinstall Cartridges
On
On
4
Install Cart.
Reinstall Cartridges
On
Blinking
5
Absorber Full
Reset the Counter
Blinking
Blinking
Alternate
Low Battery
Recharge The NICAD Battery
Blinking
Blinking
1/2
Rom/Ram
Reset the Printer, Unplugging for 30 sec.
Blinking
Blinking
3
Position Cart.
Reinstall Cartridges
Blinking
Blinking
4
Carrier
Time to Service
Blinking
Blinking
5
Absorber Full
Replacement absorber kit and reset counter
Blinking
Blinking
6
Temperature
Stop print for while
Blinking
Blinking
7
Line Feed
Service Print Head
Blinking
Blinking
8
Temperature
Change Print Head
Blinking
Blinking
9
Print Head
Service Require
Blinking
Blinking
10
Cleaning
Service Require
Blinking
Blinking
11
EEPROM
Reset the Printer, Unplugging for 30 sec.



Printer Canons BJC-80 and BJC_85 have common Problems and solutions. If you need some more information for fix you printer, please Leave a comment.

Follow by Email

Subscribe in Reader