Canon BJC-50/55 Error Codes

Canon BJC-50

Canon BJC-55

How to repair Canon BJC-50/55 Error Codes 

Most objections emerged in inkjet printers, the codes are displayed to inform the user and the repairman arrives.

Basic troubleshooting in these printers, done by reading codes.

Repairs carried out by the solutions proposed in the table.

LED Power	LED Error	Beeps Times	Error	Solution
On	On	1	Paper finished	Add Paper in the cassette
On	On	2	Paper Jam	Clear Inside paper jam
On	On	3	Cartridge	Reinstall Cartridges
On	On	4	Install Cart.	Reinstall Cartridges
On	On	6	Low Battery	Recharge The Battery
On	On	Alternate	No Battery	Recharge The Battery
On	On	1	Feed Error	Check Paper
On	On	2	Low Ink	Replace Cartridge
Blinking	On	3	Position Cart.	Reinstall Cartridges
Blinking	On	4	Low Battery	Recharge The Battery
Blinking	On	5	Absorber Full	Replacement absorber kit and reset counter
Blinking	On	6	Failed Battery	Replace The Battery
Blinking	Blinking	1-12	Services	Service Require

Canon BJC-70 Error Codes

Canon BJC-70

How to Repair Error Codes Canon BJC-70

Most objections emerged in inkjet printers, the codes are displayed to inform the user and the repairman arrives.

Basic troubleshooting in these printers, done by reading codes.

Repairs carried out by the solutions proposed in the table.

Error	Problem	Solution
C1	Absorber Full	Reset the Counter
C5	Low Battery	Recharge The Battery
E1	Paper finished	Add Paper in the cassette
E2	Paper Jam	Clear Inside paper jam
E6	Print Head	Install Print Head Properly
FC	Low Battery	Recharge The Battery
F12	Temperature	Stop print for while
F13	Print Head	Install Print Head Properly
F14	Absorber Full	Reset the Counter
Blinking	Print Head	Service Require

Hp Laserjet P3015 Printer 50.9 Fuser Error

Hp Laserjet P3015 Rear

Hp Laserjet P3015 Rear

Hp Laserjet P3015 Rear

Hp Laserjet P3015 Fuser

Hp Laserjet P3015 Fuser

Hp Laserjet P3015 Fuser

Hp Laserjet P3015

Hp Laserjet P3015

50.9 Fuser Error Because to High Temperature 

The 50.9 Fuser error is a high-temperature error in the Fuser. The first step to take is to turn off the machine for 15 minutes to cool down fuser. if the error appears again check Fuser settings on the menu and make sure that is set to normal, Other things that cause  this error weak ventilation or an extremely warm environment. Place the printer where the air flows around it. After a long and continuous prints can printer showing error  50.9. let a while cool down.

Service manual Printer HP Laserjet P3015 about the error say:

• Power cycle the product to determine if the error is persistent.
• Verify that the correct model is installed.
• Verify that the correct voltage connects to Fuser.
• Check connectors J8002, J1505, J18 are properly connected to ECU.
• Check connectors J1608, J18 are properly connected to ECU.

Fuser Replacement (RM 1-6274-000CN)

• Open the rear door.
• Pull down lower the door and door.
• Push up on the link arm to release it.
• Remove two screws.
• Open the Lower-rear door.
• Release one tab.
• Pull down on the rear-door to remove it. 
• slide the right cover toward the inside to release it. 
• Disconnect three connectors and one wire.
• Remove four screws.
• Pull out the Fuser.

Canon BJC-80/85 Error Codes

BJC-80

BJC-85

How to fix Error Codes Canon BJC-80 OR BJC-85

Most objections emerged in inkjet printers, the codes are displayed to inform the user and the repairman arrives.

Basic troubleshooting in these printers, done by reading codes.

Repairs carried out by the solutions proposed in the table.

LED Power	LED  Error	Beeps Times	Error	Solution
Off	Off	0	Printer Off
On	Off	0	Printer Ready
On	On	1	Paper finished	Add Paper in the cassette
On	Blinking	2	Low Ink	Change Cartridge
On	On	2	Paper Jam	Clear Inside paper jam
On	On	3	Print Head	Install Print Head Properly
On	Blinking	4	Cartridge	Reinstall Cartridges
On	On	4	Install Cart.	Reinstall Cartridges
On	Blinking	5	Absorber Full	Reset the Counter
Blinking	Blinking	Alternate	Low Battery	Recharge The NICAD Battery
Blinking	Blinking	1/2	Rom/Ram	Reset the Printer, Unplugging for 30 sec.
Blinking	Blinking	3	Position Cart.	Reinstall Cartridges
Blinking	Blinking	4	Carrier	Time to Service
Blinking	Blinking	5	Absorber Full	Replacement absorber kit and reset counter
Blinking	Blinking	6	Temperature	Stop print for while
Blinking	Blinking	7	Line Feed	Service Print Head
Blinking	Blinking	8	Temperature	Change Print Head
Blinking	Blinking	9	Print Head	Service Require
Blinking	Blinking	10	Cleaning	Service Require
Blinking	Blinking	11	EEPROM	Reset the Printer, Unplugging for 30 sec.

Printer Canons BJC-80 and BJC_85 have common Problems and solutions. If you need some more information for fix you printer, please Leave a comment.